Tethering Britax
| Posted By | Message |
|---|---|
|
Tethering Britax So I just installed the Britax and we have an SUV, and the tethering anchors are behind the rear seat, so I tethered it, but bc of the way it's tethered it's the biggest pain in the azz to get DD in and out of the seat, I have to contort her to get in...UGH..I know the tethers are optional but what purpose do they serve and did anyone else have this problem??? |
|
Posted 6/26/09 2:14 PM
|
|
|
Long Island Weddings
Long Island's Largest Bridal Resource
| |
|
Re: Tethering Britax Yep-I just had a post about this. You do not have to use the tethers. We did not have an anchor point under the driver and passenger seats so they are actually tethered to the captains seats that their car seats sit in. They are VERY secure. |
|
Posted 6/26/09 2:18 PM
|
|
|
Re: Tethering Britax You should definitely use the tether!!! I understand how you have it now and I've always found that way to be near impossible to imagine utilizing. My Britax came with a small strap that could be looped around a stationary part of one of the front seats that had a hook to attach the tether. If you don't have this capability (which I don't see how a car can't have this) you can get your car company to install a tether hook into the floor. We had it done by Ford with our Explorer before we had the minivan. (there was no tether hook in the back) |
|
Posted 6/26/09 2:38 PM
|
|
|
Re: Tethering Britax I didn't use the tether until I switched it to forward facing. |
|
Posted 6/26/09 4:02 PM
|
|
|
Re: Tethering Britax I know that Britax says you can use the top tether to the rear of the seat it's attached to, but I found it so much more useful and safe to tether to a floor mount towards the front of the car. That keeps the seat from tilting if you are in a rear-end collision. |
|
Posted 6/26/09 4:38 PM
|
|
|
Re: Tethering Britax Posted by GoldenRod I know that Britax says you can use the top tether to the rear of the seat it's attached to, but I found it so much more useful and safe to tether to a floor mount towards the front of the car. That keeps the seat from tilting if you are in a rear-end collision. How do you tether it to the floor, I don't have anything to tether it to, thats the problem! |
|
Posted 6/26/09 5:01 PM
|
|
|
Re: Tethering Britax Posted by pickles16 Posted by GoldenRod I know that Britax says you can use the top tether to the rear of the seat it's attached to, but I found it so much more useful and safe to tether to a floor mount towards the front of the car. That keeps the seat from tilting if you are in a rear-end collision. How do you tether it to the floor, I don't have anything to tether it to, thats the problem! I was able to attach it to the bracket that held the front seats to the frame. |
|
Posted 6/26/09 5:24 PM
|
|
|
FelAndJon Member since 6/05 10212 total posts Name: |
Re: Tethering Britax Posted by pickles16 Posted by GoldenRod I know that Britax says you can use the top tether to the rear of the seat it's attached to, but I found it so much more useful and safe to tether to a floor mount towards the front of the car. That keeps the seat from tilting if you are in a rear-end collision. How do you tether it to the floor, I don't have anything to tether it to, thats the problem! In my old car, we had a loop under the floor mat |
Posted 6/26/09 8:40 PM
|
|
|
Re: Tethering Britax Posted by FelAndJon Posted by pickles16 Posted by GoldenRod I know that Britax says you can use the top tether to the rear of the seat it's attached to, but I found it so much more useful and safe to tether to a floor mount towards the front of the car. That keeps the seat from tilting if you are in a rear-end collision. How do you tether it to the floor, I don't have anything to tether it to, thats the problem! In my old car, we had a loop under the floor mat We just looked there isn't anything really to tether it to the front, I'm going to try to look a little more tomorrow... THANKS!!! Message edited 2009-06-26 20:41:15.020000. |
|
Posted 6/26/09 8:40 PM
|
|
|
FelAndJon Member since 6/05 10212 total posts Name: |
Re: Tethering Britax What kind of car do you have? |
Posted 6/26/09 8:45 PM
|
|
|
Re: Tethering Britax Posted by FelAndJon What kind of car do you have? BMW X5, the front seats are on a track and if i get the front seat all the way froward there is absolutely nothing underneat that I can tether it to...only the back anchors which is ultra cumbresome to get DD in and out of...I have to really contort her body to get her in and out.... |
|
Posted 6/26/09 8:48 PM
|
|
|
FelAndJon Member since 6/05 10212 total posts Name: |
Re: Tethering Britax So, you are running the tether across the top of the car seat so it is attached "in front" of the rear facing car seat? Hmm, that doesn't sound very safe! Does the car manual say anything about the tethers? I would think you are better off not tethering the seat at all rather than do it that way. |
Posted 6/26/09 9:53 PM
|
|
|
Re: Tethering Britax I can tether mine but often forget and feel my seat is still solid and safe. If it makes your life difficult I don't believe it is a requirement some people don't even have anchors in their car! I also do not believe in the rear facing mode you are even supposed to tether over the seat just if you have an anchor on the floor bed below. Check the manual again- not positive though. Message edited 2009-06-26 23:18:58.470000. |
|
Posted 6/26/09 11:17 PM
|
|
|
Re: Tethering Britax Luckily we have the tether anchors in the front too for when the seat is rear facing so it's worked out and the strap isn't in our way. |
|
Posted 6/27/09 12:31 AM
|
|
|
Re: Tethering Britax Posted by FelAndJon So, you are running the tether across the top of the car seat so it is attached "in front" of the rear facing car seat? Hmm, that doesn't sound very safe! Does the car manual say anything about the tethers? I would think you are better off not tethering the seat at all rather than do it that way. Basically only European companies, like Britax, have the ability to use the top tether rear-facing. Most car seats can't use the tether, or the back of the carseat will snap in an accident. According to years of Britax literature, it is very safe, and recommended to use the top tether, either towards the floor, or to the back of the seat it's on. It's just one more level of protection. |
|
Posted 6/27/09 12:53 AM
|
|
|
Re: Tethering Britax Posted by GoldenRod Posted by FelAndJon So, you are running the tether across the top of the car seat so it is attached "in front" of the rear facing car seat? Hmm, that doesn't sound very safe! Does the car manual say anything about the tethers? I would think you are better off not tethering the seat at all rather than do it that way. Basically only European companies, like Britax, have the ability to use the top tether rear-facing. Most car seats can't use the tether, or the back of the carseat will snap in an accident. According to years of Britax literature, it is very safe, and recommended to use the top tether, either towards the floor, or to the back of the seat it's on. It's just one more level of protection. yup it's called the australian tether, if you google it you'll see how it looks, it honestly even looks uncomfortable!!!! I'm going to check again in a bit to see if I can possibly anchor it to anything on the bottom of the car.... |
|
Posted 6/27/09 6:48 AM
|
|
|
Re: Tethering Britax Posted by GoldenRod It's just one more level of protection. Yes. If the seatbelt or Latch capability was somehow not properly engaged or failed, the top tether is the only thing keeping the carseat and baby from being thrown from the car in an accident. If it exists, it should absolutely be utilized!! |
|
Posted 6/27/09 9:59 AM
|
|
|
Re: Tethering Britax I had my Britax installed by the state troopers. They did not use the tethers. |
|
Posted 6/27/09 2:14 PM
|
|
|
Re: Tethering Britax Posted by architectnycity I had my Britax installed by the state troopers. They did not use the tethers. It doesn't mean it's right, though. If the manufacturer recommends using it, and they are the ones who built and tested the seat, I would try to use it if at all possible. It concerns me a little that they didn't even try to use the extra safety features built into that particular seat.... |
|
Posted 6/28/09 8:52 AM
|
|
|
Re: Tethering Britax Posted by GoldenRod Posted by architectnycity I had my Britax installed by the state troopers. They did not use the tethers. It doesn't mean it's right, though. If the manufacturer recommends using it, and they are the ones who built and tested the seat, I would try to use it if at all possible. It concerns me a little that they didn't even try to use the extra safety features built into that particular seat.... Just to clarify-I had this issue...we have the Escalade ESV and had nothing to attach to in the front. The only thing bolted to the frame is the seat frame which moves to slide the set forward and back so that would not work. However-we could attach to the rear seat that the carseats sit in those are stationary. The tether is very tight and secure this way. I called Britax and they told me that you could A. use the tether attched to a tether point under the front seats-it must be a point that is bolted to the floor. B. Use the tether the way pickles is already using it or C. Not use the tether at all and the Britax is still safe to use and dapproved for use without the tether |
|
Posted 6/28/09 9:39 AM
|
|
Potentially Related Topics:
| Topic | Posted By | Started | Replies | Forum |
|---|---|---|---|---|
| spinoff to tethering dogs.. i had to call ASPCA yesterday! | Jesaroo | 3/31/08 | 18 | Pets |
| Britax Stroller and Infant Carseat | pmpkn087 | 6/15/06 | 0 | Parenting |
| Britax Marathon Sale | Texas4Good | 5/19/06 | 1 | Parenting |
| Britax carseats - which do you recommend? | MrsJ | 3/13/06 | 16 | Parenting |
| Does anyone have a Britax Companion infant seat? | NJmom | 3/9/06 | 0 | Parenting |
| Britax Marathon | Dani00518 | 2/26/06 | 4 | Parenting |








