Kitchenaid Stand Mixer
| Posted By | Message |
|---|---|
|
Kitchenaid Stand Mixer Wondering which one to buy??? Tilt head or bowl lift??? 5 qt or 6 qt??? |
|
Posted 1/4/21 4:17 AM
|
|
|
Long Island Weddings
Long Island's Largest Bridal Resource
| |
|
Re: Kitchenaid Stand Mixer Definitely the bowl lift, 6qt. I prefer the bigger bowl size because I'm a heavy baker. |
|
Posted 1/4/21 10:36 AM
|
|
|
Re: Kitchenaid Stand Mixer i have the smaller one with the tilt head. |
|
Posted 1/4/21 2:13 PM
|
|
|
Re: Kitchenaid Stand Mixer Thank you both.... |
|
Posted 1/4/21 2:39 PM
|
|
|
Re: Kitchenaid Stand Mixer I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. |
|
Posted 1/4/21 3:09 PM
|
|
|
Kitchenaid Stand Mixer I saw QVC and Crate and Barrel sell them. Not sure if they have the one you specifically want. |
|
Posted 1/4/21 3:15 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. ooh, i'll check this out. thanks for sharing. |
|
Posted 1/4/21 3:36 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by chris605 Thank you both.... Hopefully I can find it in stock... i have tried Kitchenaid, william Sonoma, macys, costco, target, amazon, bed bath and beyond..... but I will just keep trying.... You are welcome. Christmas seems to have wiped out the stock, guess there was a run on stand mixers. lol
|
|
Posted 1/4/21 3:45 PM
|
|
|
Re: Kitchenaid Stand Mixer I wanted to make Christmas cookies and every single store was sold out of these mixers. I ended up finding one on Facebook marketplace |
|
Posted 1/4/21 5:44 PM
|
|
|
Re: Kitchenaid Stand Mixer If you don't want to wait for a Kitchen Aid to come back in stock, Cuisinart makes a nice stand mixer and it's less money too. My daughter got it for her birthday a few years ago and I will use it periodically if I am baking a lot at once and need two mixers. They might be easier to find in stock. |
|
Posted 1/4/21 5:48 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. Does the paddle have a hard time getting the whole bowl? I have the tilt head from like 10 years ago, but I'm a pretty heavy bake so the bigger capacity would be nice! |
|
Posted 1/4/21 9:01 PM
|
|
|
Re: Kitchenaid Stand Mixer I had to replace mine this summer as it died after 10 years. I had a hard time finding one, but i was able to get the color i wanted, in stock at Crate and Barrel. And could use a coupon. |
|
Posted 1/4/21 9:04 PM
|
|
|
Kitchenaid Stand Mixer Try qvc. I see them selling kitchenaid mixers sometimes |
|
Posted 1/4/21 9:38 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by chris605 Thank you both.... Hopefully I can find it in stock... i have tried Kitchenaid, william Sonoma, macys, costco, target, amazon, bed bath and beyond..... but I will just keep trying.... I can't help with a suggestion, since mine has been in the box since my bridal shower... but check QVC. They usually have a ton of colors. |
|
Posted 1/5/21 12:44 PM
|
|
|
Kitchenaid Stand Mixer I have a tilt head. I don't use it a ton because it's in a cabinet and a pain to get down because it's so heavy. |
|
Posted 1/5/21 1:14 AM
|
|
|
Re: Kitchenaid Stand Mixer Posted by Momma2015 Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. Does the paddle have a hard time getting the whole bowl? I have the tilt head from like 10 years ago, but I'm a pretty heavy bake so the bigger capacity would be nice! there is a little left, so I do have to use a rubber spatula to really get into the bottom to make sure everything is fully mixed, but the larger size of the bowl honestly makes up for it. I bought the gardenia version. It is pale blue. Note the entire thing is ceramic, so I am much more careful making sure that it fits into the groves of the base. But the capacity is so much larger than my old bowl that I really feel it was worth it. https://www.kitchenaid.com/countertop-appliances/stand-mixers/accessories/p.5-quart-white-gardenia-ceramic-bowl.ksm2cb5pwg.html Edit my artisan is from 2003. I think the original bowl was 4.5 and this is 5. It makes a difference for me. Message edited 2021-01-05 03:26:42.240000. |
|
Posted 1/5/21 3:20 AM
|
|
|
Re: Kitchenaid Stand Mixer Posted by LSP2005 Posted by Momma2015 Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. Does the paddle have a hard time getting the whole bowl? I have the tilt head from like 10 years ago, but I'm a pretty heavy bake so the bigger capacity would be nice! there is a little left, so I do have to use a rubber spatula to really get into the bottom to make sure everything is fully mixed, but the larger size of the bowl honestly makes up for it. I bought the gardenia version. It is pale blue. Note the entire thing is ceramic, so I am much more careful making sure that it fits into the groves of the base. But the capacity is so much larger than my old bowl that I really feel it was worth it. https://www.kitchenaid.com/countertop-appliances/stand-mixers/accessories/p.5-quart-white-gardenia-ceramic-bowl.ksm2cb5pwg.html Edit my artisan is from 2003. I think the original bowl was 4.5 and this is 5. It makes a difference for me. On Amazon, you can also buy a paddle for the Kitchen Aid that has a spatula scrape on one side, it's not perfect but it really helps to scrape everything from the sides as it mixes. Just an FYI, no matter how good a mixer is you will need to stop it periodically and scrape down the bowl, there really isn't any way around this. The only way to get everything fully incorporated it to scrape the bowl as needed throughout the mixing process.
|
|
Posted 1/5/21 12:35 PM
|
|
|
Re: Kitchenaid Stand Mixer Only somewhat related to this topic.... For Christmas, I 3D printed a new front cap for DW's KitchenAid mixer, where the attachments go. Nothing wrong with the one she had, but it's the standard metal "KitchenAid" cover. I made her one with her name across it, in a matching red color on a silver cap. |
|
Posted 1/5/21 12:49 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by Hofstra26 Posted by LSP2005 Posted by Momma2015 Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. Does the paddle have a hard time getting the whole bowl? I have the tilt head from like 10 years ago, but I'm a pretty heavy bake so the bigger capacity would be nice! there is a little left, so I do have to use a rubber spatula to really get into the bottom to make sure everything is fully mixed, but the larger size of the bowl honestly makes up for it. I bought the gardenia version. It is pale blue. Note the entire thing is ceramic, so I am much more careful making sure that it fits into the groves of the base. But the capacity is so much larger than my old bowl that I really feel it was worth it. https://www.kitchenaid.com/countertop-appliances/stand-mixers/accessories/p.5-quart-white-gardenia-ceramic-bowl.ksm2cb5pwg.html Edit my artisan is from 2003. I think the original bowl was 4.5 and this is 5. It makes a difference for me. On Amazon, you can also buy a paddle for the Kitchen Aid that has a spatula scrape on one side, it's not perfect but it really helps to scrape everything from the sides as it mixes. Just an FYI, no matter how good a mixer is you will need to stop it periodically and scrape down the bowl, there really isn't any way around this. The only way to get everything fully incorporated it to scrape the bowl as needed throughout the mixing process. Oh I know, I bake A LOT. Lol! But I've seen some where it barely grazes the bottom so a small batch is all but wasted in the mixer, ya know? My mom and I are hobbyist bakers, but we usually do the bulk baking at my moms house- she has the lift bowl mixer. |
|
Posted 1/5/21 1:09 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by Momma2015 Posted by Hofstra26 Posted by LSP2005 Posted by Momma2015 Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. Does the paddle have a hard time getting the whole bowl? I have the tilt head from like 10 years ago, but I'm a pretty heavy bake so the bigger capacity would be nice! there is a little left, so I do have to use a rubber spatula to really get into the bottom to make sure everything is fully mixed, but the larger size of the bowl honestly makes up for it. I bought the gardenia version. It is pale blue. Note the entire thing is ceramic, so I am much more careful making sure that it fits into the groves of the base. But the capacity is so much larger than my old bowl that I really feel it was worth it. https://www.kitchenaid.com/countertop-appliances/stand-mixers/accessories/p.5-quart-white-gardenia-ceramic-bowl.ksm2cb5pwg.html Edit my artisan is from 2003. I think the original bowl was 4.5 and this is 5. It makes a difference for me. On Amazon, you can also buy a paddle for the Kitchen Aid that has a spatula scrape on one side, it's not perfect but it really helps to scrape everything from the sides as it mixes. Just an FYI, no matter how good a mixer is you will need to stop it periodically and scrape down the bowl, there really isn't any way around this. The only way to get everything fully incorporated it to scrape the bowl as needed throughout the mixing process. Oh I know, I bake A LOT. Lol! But I've seen some where it barely grazes the bottom so a small batch is all but wasted in the mixer, ya know? My mom and I are hobbyist bakers, but we usually do the bulk baking at my moms house- she has the lift bowl mixer. I have the lift bowl too.
|
|
Posted 1/5/21 1:19 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by GoldenRod Only somewhat related to this topic.... For Christmas, I 3D printed a new front cap for DW's KitchenAid mixer, where the attachments go. Nothing wrong with the one she had, but it's the standard metal "KitchenAid" cover. I made her one with her name across it, in a matching red color on a silver cap. Doesn't affect the mixer, but I think it looks cool, and she's the only one in the world with a cap like that. That is so cool!! Love it! |
|
Posted 1/5/21 1:19 PM
|
|
|
Re: Kitchenaid Stand Mixer I have a tilt head and it’s ancient but it still works just like a new one. They’re expensive but they’re a pretty good investment. Check their website, I just checked and they still have a few left, not a lot but a few... |
|
Posted 1/5/21 9:45 PM
|
|
|
Re: Kitchenaid Stand Mixer Posted by Hofstra26 Posted by LSP2005 Posted by Momma2015 Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. Does the paddle have a hard time getting the whole bowl? I have the tilt head from like 10 years ago, but I'm a pretty heavy bake so the bigger capacity would be nice! there is a little left, so I do have to use a rubber spatula to really get into the bottom to make sure everything is fully mixed, but the larger size of the bowl honestly makes up for it. I bought the gardenia version. It is pale blue. Note the entire thing is ceramic, so I am much more careful making sure that it fits into the groves of the base. But the capacity is so much larger than my old bowl that I really feel it was worth it. https://www.kitchenaid.com/countertop-appliances/stand-mixers/accessories/p.5-quart-white-gardenia-ceramic-bowl.ksm2cb5pwg.html Edit my artisan is from 2003. I think the original bowl was 4.5 and this is 5. It makes a difference for me. On Amazon, you can also buy a paddle for the Kitchen Aid that has a spatula scrape on one side, it's not perfect but it really helps to scrape everything from the sides as it mixes. Just an FYI, no matter how good a mixer is you will need to stop it periodically and scrape down the bowl, there really isn't any way around this. The only way to get everything fully incorporated it to scrape the bowl as needed throughout the mixing process. oh I own one. I should use it. |
|
Posted 1/6/21 1:44 AM
|
|
|
Re: Kitchenaid Stand Mixer Posted by LSP2005 Posted by Hofstra26 Posted by LSP2005 Posted by Momma2015 Posted by LSP2005 I have the tilt head, but I purchased the ceramic bowl which fits on the artisan and it is the larger bowl, so for me it is the best of both worlds. More compact size with the larger bowl. Does the paddle have a hard time getting the whole bowl? I have the tilt head from like 10 years ago, but I'm a pretty heavy bake so the bigger capacity would be nice! there is a little left, so I do have to use a rubber spatula to really get into the bottom to make sure everything is fully mixed, but the larger size of the bowl honestly makes up for it. I bought the gardenia version. It is pale blue. Note the entire thing is ceramic, so I am much more careful making sure that it fits into the groves of the base. But the capacity is so much larger than my old bowl that I really feel it was worth it. https://www.kitchenaid.com/countertop-appliances/stand-mixers/accessories/p.5-quart-white-gardenia-ceramic-bowl.ksm2cb5pwg.html Edit my artisan is from 2003. I think the original bowl was 4.5 and this is 5. It makes a difference for me. On Amazon, you can also buy a paddle for the Kitchen Aid that has a spatula scrape on one side, it's not perfect but it really helps to scrape everything from the sides as it mixes. Just an FYI, no matter how good a mixer is you will need to stop it periodically and scrape down the bowl, there really isn't any way around this. The only way to get everything fully incorporated it to scrape the bowl as needed throughout the mixing process. oh I own one. I should use it. I love it! Again, it's not perfect but it does help.
|
|
Posted 1/6/21 1:54 PM
|
|
Potentially Related Topics:
| Topic | Posted By | Started | Replies | Forum |
|---|---|---|---|---|
| For Sale: KitchenAid Stand Mixer- still available! Price reduced | JennyPenny | 9/19/13 | 13 | Families Helping Families ™ |
| Kohl’s: KitchenAid Classic Plus Stand Mixer Only $82 Shipped! | LSP2005 | 11/24/11 | 1 | Families Helping Families ™ |
| great deal on a KitchenAid ClassicSeries 4.5Qt Stand Mixer w. Spatula, $99.99 | pschica | 7/23/05 | 5 | Families Helping Families ™ |
| What would be the first thing you'd make with a Kitchenaid Mixer? | LoveyQ | 12/21/11 | 8 | Dining In or Out |
| I just used my KitchenAid Mixer for the first time! | Tine73 | 11/27/07 | 16 | Home |
| kitchenaid stand mixer | Shop24-7 | 1/13/12 | 10 | Dining In or Out |








