Invalid topic.
| Posted By |
Message |
Eireann
Two ladies and a gentleman!
Member since 5/05 12165 total posts
Name:
|
I need quick home design help! Pictures included.
I'm going to try to explain this as succinctly as possible.
We have a wall that separates our living room from our dining room. It contains three picture-frame mouldings. Our plan was to remove the third "frame" thereby opening up a walk-through between the two rooms. An opening already exists at the start of the wall into the foyer area--this is around 60 inches; we can't make the opening the same size on the other side because of these mouldings, but wanted it as symmetrical as possible.
So, they opened it up today and I love it...but it's more narrow than I had hoped. I think they could have opened it at least six more inches. In addition, we have picture frame mouldings in several areas of our home and the space in between the mouldings and the wall is always SIX inches. The space in between the moulding and the new opening is TWELVE inches.
Can you tell what I mean here? Here's the existing opening...
and here's the new opening...
Now for the question...would you say something and have them expand the opening further, negating some of the work they've already done, or leave well enough alone since it looks fine as it is?
|
Posted 3/15/10 5:25 PM  |
| |
|
Long Island Weddings
Long Island's Largest Bridal Resource | Prudential Douglas Elliman Real Estate |
Jax430
Hi!
Member since 5/05 18919 total posts
Name:
Jackie
|
Re: I need quick home design help! Pictures included.
It looks great, but the asymmetry would probably drive me nuts if I left it that way. I'm not good at speaking up when I'm not 100% happy with work someone has done, but in the end you have to remember that it's your money and your house, and YOU have to live with it. They should do it to your satisfaction.
|
| Posted 3/15/10 5:35 PM |
| |
|
Jenn627
Laaaaaaaambert!
Member since 5/08 9818 total posts
Name:
Jenn
|
Re: I need quick home design help! Pictures included.
Posted by Eireann
Now for the question...would you say something and have them expand the opening further, negating some of the work they've already done, or leave well enough alone since it looks fine as it is?
I would say something and have them open it up another 6 inches...
That's what *I* would do b/c I know I'd look at that opening every day and say to myself 'should have asked them to make it wider...'
|
| Posted 3/15/10 5:35 PM |
| |
|
eddiesmommy
best buds!
Member since 5/09 11524 total posts
Name:
Melissa
|
Re: I need quick home design help! Pictures included.
Posted by Jenn627
Posted by Eireann
Now for the question...would you say something and have them expand the opening further, negating some of the work they've already done, or leave well enough alone since it looks fine as it is?
I would say something and have them open it up another 6 inches...
That's what *I* would do b/c I know I'd look at that opening every day and say to myself 'should have asked them to make it wider...'
i agree with both of them...while it looks fine, it would totally drive me nuts everytime I looked at it. Otherwise, Id have to take the moulding down and recenter it between the two doorways.
|
| Posted 3/15/10 6:00 PM |
| |
|
CunningOne
***
Member since 5/05 26975 total posts
Name:
|
Re: I need quick home design help! Pictures included.
Hmm, I know what you mean about symmetry and stuff, but is it possible that they can't go wider because of code regs or could there be a stud in the wall that would make it impossible? We opened up a few walls in our house and ran into all sorts of issues because the beams running up and down weren't all evenly spaced like they should be.
|
| Posted 3/15/10 7:09 PM |
| |
|
Eireann
Two ladies and a gentleman!
Member since 5/05 12165 total posts
Name:
|
Re: I need quick home design help! Pictures included.
Thanks everyone! I did ask them about it because it would have driven me crazy otherwise.
Posted by chmlengr
Hmm, I know what you mean about symmetry and stuff, but is it possible that they can't go wider because of code regs or could there be a stud in the wall that would make it impossible? We opened up a few walls in our house and ran into all sorts of issues because the beams running up and down weren't all evenly spaced like they should be.
It turns out this WAS the problem. Opening it up just a couple of inches more would really have been opening up a whole can of worms.
I'm satisfied with the answer and thrilled with the way the room looks overall!!
|
| Posted 3/16/10 9:19 AM |
| |
|
HeatherRose
Life is Good :)
Member since 11/07 6605 total posts
Name:
|
Re: I need quick home design help! Pictures included.
Posted by eddiesmommy
Posted by Jenn627
Posted by Eireann
Now for the question...would you say something and have them expand the opening further, negating some of the work they've already done, or leave well enough alone since it looks fine as it is?
I would say something and have them open it up another 6 inches...
That's what *I* would do b/c I know I'd look at that opening every day and say to myself 'should have asked them to make it wider...'
i agree with both of them...while it looks fine, it would totally drive me nuts everytime I looked at it. Otherwise, Id have to take the moulding down and recenter it between the two doorways.
ITA I would say something
|
| Posted 3/16/10 11:13 AM |
| |
|
hmm8191
My loves
Member since 3/06 2908 total posts
Name:
Heather
|
Re: I need quick home design help! Pictures included.
obviously your decision was already made (for you) but just wanted to pokoe my head in and say it looks great!
|
| Posted 3/16/10 11:21 AM |
| |
|
Jenn627
Laaaaaaaambert!
Member since 5/08 9818 total posts
Name:
Jenn
|
Re: I need quick home design help! Pictures included.
Posted by Eireann
Thanks everyone! I did ask them about it because it would have driven me crazy otherwise.
Posted by chmlengr
Hmm, I know what you mean about symmetry and stuff, but is it possible that they can't go wider because of code regs or could there be a stud in the wall that would make it impossible? We opened up a few walls in our house and ran into all sorts of issues because the beams running up and down weren't all evenly spaced like they should be.
It turns out this WAS the problem. Opening it up just a couple of inches more would really have been opening up a whole can of worms.
I'm satisfied with the answer and thrilled with the way the room looks overall!!
Glad it worked out that way!!
eta: I love the look of those moldings on the wall - it looks great!!
Message edited 3/16/2010 11:49:29 AM.
|
| Posted 3/16/10 11:49 AM |
| |
|
