|
Re: Do carseats REALLY "expire"?
Posted 3/3/2012 2:51:54 PM by tara73
Difference being that seat belts are attached to the frame of the car with metal anchors. The seats of your vehicle are metal framed with fabric coverings, secured to the vehicle with metal fasteners. Carseats are made out of plastic primarily, with a fabric covering. That plastic is exposed to extreme temperatures (think about how much hotter it gets in the car than outside), acids from bodily fluids (vomit/spitup, urine etc), spills, bangs, stops, starts and sunlight. And, you know, it's plastic not metal. The plastic lawn toys which become brittle over time from exposure are a good example, so are vehicle dashes. How many cars have you seen with cracked plastic dashes just from sun exposure? Because they're made of plastic, it's much harder to visually see weaknesses in the shell at the point of attachment to the vehicle AND at the 5 pts where the harnesses come out. Will a light go off and go "ding" and render the carseat useless exactly X days from date of manufacture? No. But that is the length of time that the manufacturer says it should safely last under normal conditions. And yes, technology has changed quite a bit. Even just a few short years ago seats had over head shields, 3 pt harnesses, T shields... some boosters had swing away shields.. none of these systems are in use anymore. Mostly because they were found in real life instances to not offer optimal protection, in some instances they actually cause injuries. As for vehicle belts, it actually is recommended that seat belts be inspected for wear and tear of the belt (which is usually visible for worn belts via stretching of the belt, cuts, frays, inability to properly lock or retract, rot, wear of the seams etc ) as well as the fasteners and buckles and replaced if malfunctioning or worn (some vehicles state "periodically" for inspection, others give a time, we were told in class to inspect at 10 years or if you're purchasing a used vehicle). They should also be inspected for replacement after any type of collision (again, inspected for stretching of the webbing, creases, fraying, cuts etc) and some manufacturers recommend replacing after any collision. ETA: Seats range on expiration dates. Some are 7-8 yrs now, and some seats tack on a year or two when used in booster mode. You have to check the seat for date of manufacture and date to stop use. |