Re: LATCH system....
Posted 5/4/2011 6:19:30 PM by tara73


Posted by Xelindrya

two hooks and they need to be pulled tight (the belt part) ours doesnt even wiggle after we tighten them down.

We don't use the tether in one car because it has nothing to attach to, the other car we do.




You can get a tether retrofit in most vehicles, call a dealership for your vehicle make. Since tethering has been mandatory in Canada longer than the US many older vehicles have the spot just not the actual anchor.

LATCH - Lower Anchors and Tethers for CHildren.

It's an alternative to installing with a seatbelt. With the lower anchors there are two metal bars about 1" wide in the crease of the vehicle seat that you hook the car seat's attachments to.

The tether is normally used for forward facing seats. You won't find them on infant buckets, but you will on convertible and combination seats. The tether goes over the back of the seat (under the headrest) and attaches to an anchor to reduce forward movement. Your vehicle's manual will tell you where the tether anchor locations are and whether or not you can use the middle seat etc.


Print Post      Close Window