|
Re: Carseat install question- top tether?
Posted 4/19/2011 3:13:05 PM by tara73
yes, I have posted a pic before of how it should look, you should be able to search my posts and find it Wrap the D ring around the non movable part of the track of the front seat and attach the tether to it. (if in the center, either seat) DO NOT over tighten the tether, you don't want to change the angle of the seat. It is ok to have a touch of slack to the tether. ETA: whaddya know, it was the first thread on the bottom when I replied http://www.lifamilies.com/chat/topic-626686-1.html ETA2: There are 2 methods to tethering when RF'ing. The one you're describing is called the Australian method. This is when you route the tether back towards the seat and use the same tether anchor you would in a FF install. The method most techs prefer is the Swedish method, which is when you tether to the seat track of the seat in front of the RF restraint ![]() |