|
Re: britax boulevard, installation questions
Posted 4/1/2011 6:32:45 PM by tara73 Never use both LATCH lower anchors and the seat belt together. Angle can be as upright as 30 degrees once baby can hold his/her head up. I posted a pic yesterday, but the best way for Britax is to try to get behind the seat, lean over the top with your body leaning in towards the bottom/back of vehicle seat, pull both latch straps. Really get your weight in there for leverage. You can also put your knee in the seat and put your body weight on that way too. To check your angle, put your kid in. the lines/levels they put on the seats aren't always accurate. Seat is correct when you can't move more than 1" side to side or front to back at the belt path ONLY. (if you move the top of the seat, it WILL move and is supposed to) If you decide to tether RF, use the D ring and wrap it around the track of the front seat (passenger or driver whichever it is behind, if middle then whichever is easier to access) attach the tether and tighten but leave some slack. You don't want to tighten so much that it pulls the angle of the seat down more. Make sure you've put the blvd into recline mode as well |