|
Re: cleaning cast iron
Posted 2/2/2011 1:27:07 PM by LightUpOurLife These are the instructions that I follow. From the lodgemfg.com website Cleaning your Lodge Cast Iron After cooking, clean utensil with a stiff nylon brush and hot water. Using soap is not recommended, and harsh detergents should never be used. (Avoid putting a hot utensil into cold water. Thermal shock can occur causing the metal to warp or crack). TIP: If you are having trouble removing stuck-on food, boil some water in your pan for a few minutes to loosen residue, making it easier to remove. Towel dry immediately and apply a light coating of oil to the utensil while it is still warm. Re-Seasoning your Lodge Cast Iron While maintaining the seasoning (as in Step 5 above) should keep your Cast Iron in good condition, at some point you may need to repeat the seasoning process. If food sticks to the surface, or you notice a dull, gray color, repeat the seasoning process: Wash the cookware with hot, soapy water and a stiff brush. (It is okay to use soap this time because you are preparing to re-season the cookware). Rinse and dry completely. Apply a thin, even coating of MELTED solid vegetable shortening (or cooking oil of your choice) to the cookware (inside and out). Place aluminum foil on the bottom rack of the oven to catch any dripping. Set oven temperature to 350 – 400 degrees F. Place cookware upside down on the top rack of the oven. Bake the cookware for at least one hour. After the hour, turn the oven off and let the cookware cool in the oven. Store the cookware uncovered, in a dry place when cooled. |