Re: Added some photos...
Posted 1/24/2011 3:21:00 PM by Nik211


Posted by KimberlyScott

It looks great Nik, would you mind sharing your framing tips? Do you guys have mitering saw? How did you cut the edges?



we got molding at Lowes....I think it was called casing? you can use anything really but I was looking for something that was wide and that I liked the design of...we do have a miter saw - DH made the cuts in about 10 minutes...then i painted. same paint i used for the cabinet. 3 coats. i also painted the back piece - just enough so that any reflection showing would be brown and not bare wood (that is important b/c when you put the wood against the mirror you can see the reflection of the back of the wood a little bit)....once it was dry we got heavy duty contractors glue - and this is the part where it's scary! Chat Icon starting with the bottom piece we put the glue on the back of the wood - make sure you put the glue at the furthest part of wood from the mirror b/c when you press it the glue will squish up and you don't want to see the glue's reflection in the mirror - or have it come up onto the mirror (we glued directly onto the mirror - if you glue onto the wall around the mirror you don't really have to worry about that so much). then we did the sides, the top piece last. we checked with a level to make sure we were straight before pressing the pieces firm. then after it was up for a few days i went back with spackle and filled in any open spaces in the corners. for whatever reason some of the corners had small spaces where they didn't meet pefectly. then once the spackle was dry i painted it.

the hardest part was attaching the pieces to the mirror - b/c it's awkward and the glue sets really quick. it was pretty easy to do but it took longer than they make it seem on TV...
Print Post      Close Window