Re: washer
Posted 11/1/2010 9:35:48 AM by GoldenRod

It happened to mine. It wound up being the switch that detects if the door is closed or not. It will fill with water with the door opened, but it won't actually wash or drain. I unscrewed two screws, took the sensor and tied it temporarily to the "closed door" position, and it worked fine. I then ordered a replacement switch for a few dollars. Saved several hundred dollars by just checking a few things.

Also make sure the drain isn't clogged. A clogged drain will prevent the water from draining.

Stay next to the washer during a cycle (you can manually advance the dial during the longer parts, since you aren't actually washing anything), and see what's happening at each cycle. It obviously fills, but see if the drum spins to clean, and see if it tries to drain (listen for noises), see if it it tries to spin dry the clothes, etc.

That's what I did to figure out where the problem was.
Print Post      Close Window