|
Re: Removing sheetrock/installing new pieces
Posted 11/4/2007 9:14:08 AM by MrsT
It's no big deal. We had this done yesterday at a rental by our friend (a contractor). You will need a knife (utility to cut the sheetrock), panels of sheetrock, nails (special ones for sheetrock), tape (fiberglass or paper), a hand trowel (for smoothing the mud), compound (sheetrock mud) and sandpaper plus the paint. You will need a tape measure too. Find the wall studs & cut out the damaged section of the wall as straight as possible. Measure the hole and cut a replacement piece to fit into the hole. Nail it into place onto the wall studs and put the mud on the seams and smooth it down.. Then apply the tape then apply more mud and smooth it down. Once it's dry (maybe 2 hours) you can sand it down, prime & paint. |