|
Re: Repost from TTC
Posted 9/7/2007 9:37:13 AM by 2kids2cats Thanks! The reset instructions are different for a used monitor, I gave them to my friend when I lent her mine, but forgot where I got it from. I found it. If anyone else may need it: What you do is: Unwrap one test stick and while the monitor is still off, insert the test stick into the test stick slot. Simultaneously, press and hold down the "on" button on the side of the monitor, while you press and hold down on the "m" button. Continue to press down on both buttons until you see in the window a whole bunch of symbols -- this will take a few minutes (first thing to come up will be a symbol telling you to take stick out... ignore it). When you see the screen flash up with all the symbols, release both buttons and take out the test stick. You'll know you've done it right because the screen now should have two flashing lines where the cycle day indicator is (upper right corner). If the two lines are flashing.... When you next get your period, on Cycle day 1 (the first day you see full red blood flow on a pad, not the day you start spotting) press the "m" button until the flashing lines turn into a "1" --- release the "m" button. If you miss setting the monitor on your CD 1, don't worry. You have up until CD 5 to set the "m" button. Just hold the button down until the day number on screen comes up to the corresponding day number of your cycle. (This will only work up until day 5. If you go beyond day 5, you'll have to reset the monitor and start over.) |