|
Re: Installing Sirius
Posted 2/1/2007 10:27:54 PM by Blazesyth We don't have ours hardwired and they work just fine. If you don't hardwire it, its an easy installation. There is a power cord from the reciever that goes into the cigarette lighter, and an antenna that goes outside the car on the roof. If you have dropdown seats in the back to the trunk, that is easy. We put our antenne wire under the front seat, down on the floor of the backseat (put the mat on top) and then thru the splitseat into the trunk, and out the side of the trunk to the hood of the car. As someone said above, this type of installation says 15 minutes max. You should look at doing it this way first, as its cheaper and quicker. The downside is some of the newer recievers is that the FM Modulator is not as strong as older recievers, due to FCC regulations. The FM modulator is the part of the reciever that sends the waves to 'broadcast' to your FM radio in the car. If you have problems with other signals interfering from other cars, then it's time to hardwire the unit. You can look on the Sirius site to see what FM channel they suggest you broadcast on - they have it sectioned off by zip - look at your home zip and work zip and see if there are any commonalities, and set your FM modulator and radio to that. As for mounting, most car kits come with a suction cup base to hang off the window. I hate that in my car, so I dont use it and I keep it just laying on the center console near the gear shifter. |