|
Re: versa tether? (Britax)
Posted 12/3/2006 2:29:31 PM by GoldenRod I attached mine to the base of the driver's seat, below the adjustment track, so moving the seat forward or back wouldn't interfere. It's OK to attach the tether to the rear of the seat that the seat is on, but it's better to attach it to the floor between the rear seat and the front seat. Just review the manual, and make sure what you are planning to do is OK in the manual. When it comes to car seats, I don't take advice from people who don't have the same seat, because the rules for each seat vary quite a bit between manufacturers. Even between different models from the same vendor. Most car seats can't use the top tether at all when rear-facing. Others can't use the tether over the top of the seat rear-facing. Britax happens to have the extra strength and support to allow nearly any type of tethering. I have a Britax Wizard and just ordered a Britax Boulevard, so I have some experience with Britax, but not with the Marathon. Here's the Marathon owner's manual on-line: http://www.britaxusa.net/pdf/guide_marathon.pdf Actually, after checking out the manual for the Marathon and the Boulevard http://www.britaxusa.net/pdf/guide_boulevard.pdf , I see that the Boulevard allows the tether to go over the car seat itself, while the Marathon doesn't. |